AEG L87405FL Product Manual - Page 14
Options, Settings
View all AEG L87405FL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 www.aeg.com 7. OPTIONS 7.1 Start/Pause Press button Start/Pause to start or interrupt a programme. 7.2 Delay Start With this option you can delay the start of a programme from 30 minutes to 20 hours. The display shows the related indicator and delay time. 7.3 Time Save With this option you can decrease the programme duration. • Press this button one time to set 'Shortened duration' for items with daily soil. • Press this button two times to set 'Extra Quick' for items with almost no soil. Some programmes accept only one of the two options. 7.4 Extra Rinse With this option you can add some rinses to a washing programme. Use this option for persons allergic to detergents and in areas where the water is soft. The related indicator comes on. 7.5 Stains/Prewash Press this button to add the stain and/or a prewash phase to a programme. Press the button again and again to activate one or two options. The related symbol and the indicator bar comes on in the display. 8. SETTINGS 8.1 Acoustic signals The acoustic signals operate when: • You activate the appliance. • You deactivate the appliance. • Stains: Use this option for laundry with hard stains to remove. When you set this option, put the stain remover into compartment . This function increases the programme duration. This option is not available with a temperature lower than 40° C. • Prewash: Use this option to add a prewash phase before the washing phase. We recommend that you use this option when you have laundry with a high level of soil. The set of this option increases the programme duration. 7.6 Spin Press this button to: • Decrease the maximum speed of the spin phase of the programme. The display shows only the spin speeds available with the set programme. • Deactivate the spin phase. • Activate the Rinse Hold function. Set this function to prevent fabric creases. The appliance does not drain the water when the programme is completed. 7.7 Temp. Press this button to change the default temperature. When the display shows and , the appliance does not heat the water. • You press the buttons. • The programme is completed. • The appliance has a malfunction. To deactivate/activate the acoustic signals, press Stains/Prewash and Extra Rinse at the same time for 6 seconds.