AEG L87405FL Product Manual - Page 17
Cancelling a running
View all AEG L87405FL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
10.5 Setting a programme 1. Turn the programme knob. The related programme indicator comes on. The indicator of button Start/Pause flashes with red colour. The display shows the default temperature, the spin speed and the empty indicator bars of the available functions. 2. To change the temperature and/or the spin speed, press the related buttons. 3. Set the available functions. 10.6 Starting a programme without the delay start Press button Start/Pause to start the programme. The relevant indicator stops to flash and stays on. On the display the indicator of the phase is operation starts to flash. The programme starts, the door is locked. The display show the indicator . The drain pump can operate for a short time when the appliance fills water. 10.7 Starting a programme with the delay start 1. Press button Delay Start again and again until the display shows the number of minutes or hours of delay. The related indicator comes on. 2. Press button Start/Pause. The appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button Start/Pause to start the appliance, you can cancel or change the set of the delay start. 10.8 Cancelling the delay start To cancel the delay start: ENGLISH 17 1. Press button Start/Pause to set the appliance to pause. The related indicator flashes. 2. Press button Delay Start repeatedly until the display shows . 3. Press button Start/Pause again to start the programme immediately. 10.9 Behaviour of the appliance After approximately 15 minutes from the start of the programme: • The appliance adjusts automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. • The display shows the new time value. 10.10 Cancelling a running programme 1. Press button Auto Off to cancel the programme and to deactivate the appliance. 2. Press button Auto Off again to activate the appliance. Now, you can set a new washing programme. Before starting the new programme the appliance could drain the water. In this case, make sure that the detergent is still in the detergent compartment, if not fill the detergent again. 10.11 Interrupting a programme and changing a function You can change only some options before they operate. 1. Press button Start/Pause. The related indicator flashes. 2. Change the function set. 3. Press the button Start/Pause again. The programme continues.