AEG L87494EFL Product Manual - Page 10

10 www.aeg.com The indicator bar is fully filled when you set to the maximum number of rinses. The Stain symbol comes on when you activate the function. The Prewash symbol comes on when you activate the func- tion. L The indicator bar is not fully filled when you set only one of the functions. The indicator bar is fully filled when you set the two functions. 5.4 Start/Pause button 4 Press button 4 to start or interrupt a programme. 5.5 Delay start button 5 Press button 5 to delay the start of a programme from 30 minutes to 20 hours. 5.6 Time save button 6 Press button 6 to decrease the duration of the programme. - Press one time to set 'Shortened dura- tion' for items with daily soil. - Press two times to set 'Extra Quick' for items with light soil. Some programmes accept only one of the two functions. STAIN • Use this function for laundry with hard stains to remove. When you set this function, put the stain remover into compartment . This function increases the programme duration. This function is not available with a temperature lower than 40° C. PREWASH • Use this function to add a prewash phase before the washing phase. We recommend that you use this function when you have laundry with a high level of soil. The set of this function increases the programme duration. 5.9 Spin button 9 5.7 Extra rinse button 7 Press button 7 to add rinsing phases to a programme. Use this function for persons allergic to detergents and in areas where the water is soft. 5.8 The Stain-Prewash button 8 Press button 8 to add the stain and/or a prewash phase to a programme. Press the button again and again to activate one or two options. The related symbol and the indicator bar comes on in the display. Press this button to: • Decrease the maximum speed of the spin phase of the programme. The display shows only the spin speeds available with the set programme. • Deactivate the spin phase. • Activate the 'Rinse Hold' function. Set this function to prevent fabric creases. The appliance does not drain the water when the programme is completed. 5.10 Temperature button 10 Press button 10 to change the default temperature. When the display shows - -, the appliance does not heat the water.