AEG L87494EFL Product Manual - Page 18
Setting and starting a, programme, Interrupt a programme, Cancel a programme, Change a function, Set
View all AEG L87494EFL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 www.aeg.com 9.3 Setting and starting a programme 1. Turn the programme knob. The related programme indicator comes on. 2. The indicator of button 4 flashes with red colour. 3. The display shows the default temperature, the spin speed and the empty indicator bars of the available functions. 4. To change the temperature and/or the spin speed, press the related buttons. 5. Set the available functions. 6. Press button 4 to start the pro- gramme. The indicator of button 4 is on. The drain pump can operate for a short time when the appliance fills water. The appliance adjust automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. After approximately 15 minutes from the start of the programme, the display shows the new time value. 9.4 Interrupt a programme 1. Press button 4 . The indicator flashes. 2. Press button 4 again. The washing programme continues. 9.5 Cancel a programme 1. Press button 1 to cancel the programme and to deactivate the appliance. 2. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. 9.6 Change a function You can change only some functions before they operate. 1. Press button 4 . The indicator flashes. 2. Change the function set. 9.7 Set the delay start 1. Press button 5 again and again until the display shows the number of minutes or hours. The related symbols comes on. 2. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. 9.8 Cancel the delay start 1. Press button 4 . The related indicator flashes. 2. Press button 5 again and again until the display shows 0'. 3. Press button 4 . The programme starts. 9.9 Open the door While a programme or the delay start operates, the appliance door is locked. To open the appliance door: 1. Press button 4 . The door lock symbol in the display goes off. 2. Open the appliance door. 3. Close the appliance door and press button 4 . The programme or the delay start continues.