AEG SKD71800C0 Product Manual - Page 12
The COOLMATIC function
View all AEG SKD71800C0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 www.aeg.com Problem Possible cause Solution The compressor does not start immediately after pressing the COOLMATIC, or after changing the temperature. This is normal, no error has The compressor starts after a occurred. period of time. Water flows inside the refrig- The water outlet is clog- erator. ged. Clean the water outlet. Food products prevent that water flows into the water collector. Make sure that food products do not touch the rear plate. Water flows on the floor. The melting water outlet is not connected to the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray. Temperature cannot be set. The FROSTMATIC or COOLMATIC function is switched on. Switch off FROSTMATIC or COOLMATIC manually, or wait until the function resets automatically to set the temperature. Refer to "FROSTMATIC or COOLMATIC function". DEMO appears on the display. The appliance is in demon- Keep the OK pressed for ap- stration mode. proximately 10 seconds until a long sound is heard and dis- play shuts off for a short time. The temperature in the ap- The temperature regulator Set a higher/lower tempera- pliance is too low/too high. is not set correctly. ture. The door is not closed cor- Refer to "Closing the door". rectly. The food products' temperature is too high. Let the food products temperature decrease to room temperature before storage. Many food products are stored at the same time. Store less food products at the same time. The door has been opened often. Open the door only if necessary. The COOLMATIC function Refer to "COOLMATIC func- is switched on. tion". There is no cold air circula- Make sure that there is cold air tion in the appliance. circulation in the appliance.