AEG SKD71800C0 Product Manual - Page 13
Installation
![]() |
View all AEG SKD71800C0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
If the advice does not lead to the desired result, contact the nearest Authorised Service Centre. 7.2 Closing the door 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to "Installation". 3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre. 8. INSTALLATION 8.1 Positioning This appliance can be installed in a dry, well ventilated indoor where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance: Climate Ambient temperature class SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre. ENGLISH 13 7.3 Replacing the lamp The appliance is equipped with a longlife LED interior light. Only service is allowed to replace the lighting device. Contact your Authorised Service Centre. 8.2 Electrical Connection CAUTION! Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. The wires in the mains lead are coloured in accordance with the following code: A B C D E • A - green and yellow: Earth • C - brown: Live • D - blue: Neutral
![](/manual_guide/products/aeg-skd71800c0-product-manual-5c0dc47/13.png)