AEG T6DBG820N User Manual - Page 15

2. Select 1 of the available programs. 3. Touch and hold down the Dryness Level and Anti-crease buttons at the same time. One of the symbols appears on the display: - Maximum dryness - Extra dryness - Standard dryness 4. Touch the Start/Pause button repeatedly until you reach the desired dryness level. Dryness level Display symbol Maximum dryness Extra dryness Standard dryness 5. To memorise the setting touch and hold down the Dryness Level and Anti-crease buttons at the same time for approximately 2 seconds. 10. CARE AND CLEANING 10.1 Cleaning the filter At the end of each cycle the Filter symbol comes on the display and you must clean the filter. The filter collects the fluff during the drying cycle. To clean the filter: 1. Open the door. Pull the filter up. ENGLISH 15 9.3 Deactivating the tank indicator The water container indicator is activated by default. It illuminates at the end of the drying cycle or during the cycle if the water reservoir is full. If the draining kit is installed the water container is drained automatically and the indicator can be deactivated. To deactivate the indicator: 1. Turn the appliance on. 2. Select 1 of the available programs. 3. Touch and hold down Anti-crease and Time Drying buttons at the same time. One of 2 configurations is possible: • the Tank indicator: is on if the symbol appears - the water container indicator is permanently activated • the Tank indicator: is off if the symbol appears - the water container indicator is permanently deactivated 2. Open the filter. 3. Use a moist hand to clean the filter.