AEG T7DBG840N User Manual - Page 23
Problem, Possible cause, Remedy
![]() |
View all AEG T7DBG840N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ENGLISH 23 Problem Possible cause Remedy Incorrect programme selection. Select a suitable programme. 1) The filter is clogged. Clean the filter. 2) Dryness Level option was set to iron dry.3) Change Dryness Level option to a higher level. Unsatisfactory drying result. The load was too large. The airflow slots are clogged. Do not exceed the maximum load size. Clean the airflow slots at the bot‐ tom of the appliance. There is some dirt on the humidity Clean the front surface of the sensor in the drum. drum. The dryness level was not set to the desired level. Adjust the dryness level. 4) The condenser is clogged. Clean the condenser. 2) The loading door does not close The filter is not locked into posi‐ tion. Laundry is trapped between the door and the seal. Put the filter in the correct position. Remove trapped items and close the door. It is not possible to change the programme or option. After a cycle starts it is not possi‐ ble to change the programme or option. Turn the tumble dryer off and on. Change the programme or option as required. It is not possible The option you tried to select is not Turn the tumble dryer off and on. to select an op‐ available for the selected pro‐ Change the programme or option tion. An acoustic gramme. as required. signal is emit‐ ted. Unexpected du‐ ration time ap‐ pears on the display. The drying duration is calculated according to load size and damp‐ ness. This is automated - the appliance is working correctly. A programme is The water container is full. inactive. Drain the water container, push the Start/Pause button. 2)
![](/manual_guide/products/aeg-t7dbg842r-user-manual-7f36f4a/23.png)