AIWA CDC-X227 Operating Instructions - Page 6

Labeled-side up Track number CD indicator Elapsed playing time To Press Eject a CD z Skip to the next track t Go back to the beginning of the current track Each extra press skips backward one extra track r Locate a specific point in Press and hold r or a track t until you find the point. Note • When you play a CD that is already inserted, CD play starts at the point where it stopped the previous time. A newly inserted CD starts from the first track. • A CD-R or CD-RW may take some time to start playing back, but this is not a malfunction. • If a CD-R or CD-RW with no data or incompatible data is inserted, "E03" will appear in the display. The unit cannot play such discs. Intro Play You can locate a desired track by monitoring the first 10 seconds of all the tracks on a CD. 1 Press INT during CD play. "SCAN" appears in the display. 2 Press INT again when the desired track is played. The unit returns to normal CD play. One track Repeat Play You can play a track repeatedly. 1 Press REP1 during CD play. "REPEAT1" appears in the display. To cancel One track Repeat Play, press REP1 again. Random Play You can play all the tracks in random order. 1 Press RNDM during CD play. "RANDOM" appears in the display. To cancel Random Play, press RNDM again. Note During Random Play, pressing r allows you to skip only to the beginning of the current track, not to the previous track. AUXILIARY EQUIPMENT Listening to a cassette/MD/MP3 portable player or other equipment You can listen to equipment connected to the unit. Refer to the operating instructions for the corresponding equipment for more detailed information. Be sure to remove inserted CDs to prevent possible damage to the unit before connecting the equipment. AUX jack 1 Connect a cassette/MD/MP3 portable player or other equipment to the unit's AUX jack (3.5 mm dia.). 2 Press SRC repeatedly until "AUX" appears in the display. During AUX mode, the clock display appears. OTHER FUNCTIONS AUDIO CONTROL Changing the key illumination color You can choose blue or red as the key illumination color. 1 Press and hold SRC until "ILL" appears in the display. 2 Turn AUDIO CONTROL to select 1 (for blue) or 2 (for red). Setting the dimmer of the display 1 Press and hold SEL until "D" appears in the display. 2 Turn AUDIO CONTROL to select "D 0 (bright)" or "D 1 (dimmed)." 5 ENGLISH