AIWA CDC-X317 Operating Instructions - Page 3

Theft Protection, Basic Operation, Audio And Clock, Adjustment - manual

Page 3 highlights

THEFT PROTECTION Take the front panel with you when leaving the car, and keep it in the supplied carrying case. Detaching the front panel Before detaching the front panel, remove the CD to prevent possible damage to the unit. 1 Press z to remove the CD. 2 Press and hold PWR/MUTE until the unit turns off. 3 Press %. (Hold the panel with one hand to prevent accidentally dropping it.) 4 Remove the panel. Attaching the front panel 1 Engage the left side of the front panel to the left catch on the unit. 2 Push the panel forward until it locks. Be sure not to press any buttons while you are attaching the panel. BASIC OPERATION, AUDIO AND CLOCK ADJUSTMENT Smart Jog Turning the unit on/off • Press PWR/MUTE to turn on the unit. The unit also turns on when you insert a CD. • Press and hold PWR/MUTE until the unit turns off. Note Most operations described in this manual require the unit to be turned on before starting the operation, unless explicitly stated otherwise. Changing the source mode 1 Press FNC. Pressing FNC cycles through source modes in the following order: Note Do not touch the front panel connector. This could cause a poor or faulty connection. Security lamp The security lamp will continue to flash while the front panel is detached from the unit. * "CD" does not appear in the display when there is no CD in the unit. **CD Changer Play mode (CDC-X517M only, available when an optional CD Changer is connected) Adjusting the volume 1 Turn the Smart Jog. VOL (volume) indicator flashes. Muting the sound 1 Press PWR/MUTE briefly. To restore volume, briefly press PWR/MUTE again. ENGLISH 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

ENGLISH
2
ENGLISH
2
THEFT PROTECTION
Take the front panel with you when leaving the car, and
keep it in the supplied carrying case.
Detaching the front panel
Before detaching the front panel, remove the CD to
prevent possible damage to the unit.
1
Press
z
to remove the CD.
2
Press and hold
PWR/MUTE
until the unit turns off.
3
Press
%
. (Hold the panel with one hand to prevent
accidentally dropping it.)
4
Remove the panel.
Attaching the front panel
1
Engage the left side of the front panel to the left catch
on the unit.
2
Push the panel forward until it locks. Be sure not to
press any buttons while you are attaching the panel.
Note
Do not touch the front panel connector. This could cause
a poor or faulty connection.
Security lamp
The security lamp will continue to flash while the front
panel is detached from the unit.
BASIC OPERATION,
AUDIO AND CLOCK
ADJUSTMENT
Turning the unit on/off
• Press
PWR/MUTE
to turn on the unit. The unit also
turns on when you insert a CD.
• Press and hold
PWR/MUTE
until the unit turns off.
Note
Most operations described in this manual require the
unit to be turned on before starting the operation, unless
explicitly stated otherwise.
Changing the source mode
1
Press
FNC
.
Pressing
FNC
cycles through source modes in the
following order:
*
“CD” does not appear in the display when there is no
CD in the unit.
**CD Changer Play mode (CDC-X517M only, available
when an optional CD Changer is connected)
Adjusting the volume
1
Turn the Smart Jog.
VOL (volume) indicator flashes.
Muting the sound
1
Press
PWR/MUTE
briefly.
To restore volume,
briefly press
PWR/MUTE
again.
Smart Jog