AIWA CDC-X317 Operating Instructions - Page 6

10 Press and hold INFO until the unit turns off, and setting is completed. When the unit is on, "MY INFO" appears in the display indicating that the unit is standby for a timer. During the timer-activated tuning, "MY INFO" continues to flash. To cancel the timer standby, press INFO so that "MY INFO" disappears. Note • To discontinue the timer setting, press and hold PWR/ MUTE until the unit turns off. • To check the setting, turn off the unit, then press INFO. The unit displays the scheduled turn-on and turn-off times with the appropriate radio frequency. • The unit automatically starts tuning at the scheduled time regardless of the current source mode. When the scheduled program is over, the unit automatically returns to the former source mode. • Timer setting remains enabled even if you turn off the unit, and then turn it on. This is true even if you detach the front panel, and reattach it. • However, if you press FNC to change the source mode during timer-activated tuning, the scheduled program is canceled. CD PLAYER OPERATION Playing a CD You can play CDs, CD-Rs and CD-RWs using the procedure described below. 1 Insert a CD. "CD" appears in the display. CD play starts. If a CD is already inserted, press FNC repeatedly to select CD play mode. In normal play, when the last track finishes, the unit returns to the first track and continues to play. 5 ENGLISH Labeled-side up CD indicator Track number Elapsed playing time To Press Eject a CD z Skip to the next track t Go back to the beginning of the current track Each extra press skips backward one extra track r Locate a specific point in Press and hold r or a track t until you find the point. Note • When you play a CD that is already inserted, CD play starts at the point where it stopped the previous time. A newly inserted CD starts from the first track. • A CD-R or CD-RW may take some time to start playing back, but this is not a malfunction. • If a CD-R or CD-RW with no data or incompatible data is inserted, "E03" will appear in the display. The unit cannot play such discs. Intro Play You can locate a desired track by monitoring the first 10 seconds of all the tracks on a CD. 1 Press INT during CD play. "SCAN" appears in the display. 2 Press INT again when the desired track is played. The unit returns to normal CD play. One track Repeat Play You can play a track repeatedly. 1 Press REP1 during CD play. "REPEAT1" appears in the display. To cancel One track Repeat Play, press REP1 again. Random Play You can play all the tracks in random order. 1 Press RNDM during CD play. "RANDOM" appears in the display. To cancel Random Play, press RNDM again. Note During Random Play, pressing r allows you to skip only to the beginning of the current track, not to the previous track.