AIWA CDC-X317 Operating Instructions - Page 9
Specifications - installation
View all AIWA CDC-X317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
SPECIFICATIONS RADIO SECTION (FM) Frequency Range: 87.5 MHz - 108 MHz (100-kHz steps)* or 87.5 MHz - 108 MHz (50-kHz steps)* Usable Sensitivity: 12.7 dBf 50 dB Quieting Sensitivity: 17.2 dBf IF Rejection: 80 dB Frequency Response: 30 Hz - 15,000 Hz S/N Ratio: 63 dB Stereo Separation: 35 dB at 1 kHz Alternate Channel Selectivity: 70 dB Capture Ratio: 3 dB (AM) Frequency Range: 530 kHz - 1,710 kHz (10-kHz steps)* or 531 kHz - 1,602 kHz (9-kHz steps)* Usable Sensitivity: 30 µV (30 dB) STEERING WHEEL REMOTE CONTROL (CDC-X517M and CDC-X417) Dimensions: approx. 67 (W) × 26 (H) × 27 (D) mm (2 3/4 (W) × 1 1/16 (H) × 1 1/8 (D) inches) (excluding holder) Weight: approx. 38 g (1.33 oz.) (including holder, battery) Supplied Accessories: Mounting kit (1 set), Lithium battery (1) • Specifications and external appearance are subject to change without notice due to product improvement. REAR PANEL CDC-X517M * Set the frequency increment for your area using the switch on the bottom of the unit. (The switch is factory-set to the 10k position [for the U.S.A.]) CD SECTION Frequency Response: 17 Hz - 20 kHz +0/-3 dB Dynamic Range: More than 80 dB Channel Separation: More than 65 dB S/N Ratio: More than 85 dB Wow/Flutter: Not applicable AUDIO SECTION Max. Power Output: 50 W × 4 channels (CDC-X517M), 45 W × 4 channels (CDC-X417, CDC-X317) AUX IN input Input sensitivity (load impedance) AUX IN: 300 mV (10 kΩ) GENERAL Power-Supply Voltage: 14.4 V (11 to 16 V allowable), DC, negative ground Load Impedance: 4 Ω Tone Control: Bass ± 10 dB at 100 Hz, Treble ± 10 dB at 10 kHz Preamp Output Voltage (load impedance): 2.2 V (10 kΩ) Installed size: 182 (W) × 53 (H) × 155 (D) mm (7 1/4 (W) × 2 1/8 (H) × 6 1/8 (D) inches) Supplied Accessory: Carrying case (1) CDC-X417, CDC-X317 ENGLISH 8