AIWA CSD-TD69 Operating Instructions - Page 5

Remote control (CSD-TD69 only) Insert two R6 (size AA) batteries. R6 (AA) When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries. The remote control may not operate correctly when: - The unit is exposed to intense light, such as direct sunlight - Objects block the remote control signal to the unit To use the buttons on the remote control Buttons on the remote control and the main unit with identical indications have the same functions. To turn the power on Press POWER to turn on the display. When using the unit on the batteries, this button will not turn the power on. To turn the power off Press POWER to turn off the display. To use the FUNCTION button Each time FUNCTION is pressed while the power is on, the function is selected cyclically. CD TAPE TUNER Specifications Tuner section Frequency range, antenna - FM: 87.5 - 108.0 MHz Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step) Ferrite bar antenna Deck section Track format - 4 tracks, 2 channels / Frequency range - Normal tape: 50 - 12,500 Hz (EIAJ) / Recording system - AC bias / Erasing system - AC erase / Heads - Recording/playback head (1), Erasure head (1) CD player section Disc - Compact disc / Scanning method - Non-contact optical scanner (semiconductor laser) General Speaker - 100 mm cone type (2) / Output - Headphones jack (stereo mini-jack) / Power output - 2.5 W + 2.5 W (EIAJ, 7 ohms, THD 10% DC) / Power requirements - DC 12 V using eight size C (R14) batteries, AC 120 V, 60 Hz / Power consumption - 16 W / Dimensions (W × H × D) - 414 × 181 × 240.4 mm (16 3/8 × 71/4 × 91/2 in.) / Weight (excluding batteries) - 3.2 kg (7 lbs. 1 oz.) / Accessories - Remote control (1, CSD-TD69 only), AC cord (1) Specifications and external appearance are subject to change without notice. COPYRIGHT En Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used. POWER FUNCTION If an erroneous display or malfunction occurs Turn off the unit and press POWER 6 STANDBY/ON while pressing s. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on. ENGLISH 5