AIWA CSD-TD69 Operating Instructions - Page 7

DISPLAY BAND e PLAY/ PAUSE (CSD-TD69 only) 0-9, +10 MODE EQ VOL k, i f, g s STOP PRESETTING STATIONS You can preset up to 15 stations in each band. 1 Select a station. 2 Press s STOP/SET/CLEAR * once so that "M" is displayed to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band. Preset number Frequency * or s STOP on the remote control (CSD-TD69 only) 3 Repeat steps 1 and 2. The next station will not be stored if a total of 15 preset stations have already been stored for a band. To listen to preset stations Select a band then press PRESET or e PLAY/ PAUSE repeatedly. To select a preset number directly with the remote control (CSD-TD69 only) Press the numbered buttons 0-9 and +10. Example: To select number 15, press +10 and 5. To select number 10, press +10 and 0. To clear a preset station Select the preset number first. Within 4 seconds, hold down s until "M" and the preset number disappear. The higher numbers in the band are decreased by one. SOUND ADJUSTMENT Volume or tone adjustment does not affect recording. VOLUME (VOL, CSD-TD69 only) Press VOLUME M or N on the unit or VOL k or i on the remote control. The volume level is displayed as a number from 0 to 25. • The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. • Pressing DISPLAY on the remote control displays the adjusted volume level (CSD-TD69 only). 3-MODE EQ * (equalizer) Press 3-MODE EQ repeatedly until the desired mode is displayed. The equalizer mode changes to R (Rock), P (Pop), J (Jazz) or no equalization, cyclically. Rock - Emphasizes the high and low range of music. Pop - Emphasizes voice and midrange of music. Jazz - Emphasizes the low range of music. * or EQ on the remote control (CSD-TD69 only) T-BASS system The T-BASS system enhances the realism of lowfrequency sound. En Press T-BASS to turn it on or off. ENGLISH 7