ASRock 775XFire-VSTA User Manual - Page 22
DVI connector
View all ASRock 775XFire-VSTA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Step 4. Install the Radeon CrossFireTM Edition graphics card to PCIE1 slot. For the proper installation procedures, please refer to section "Expansion Slots". Radeon CrossFireTM Edition graphics card Standard Radeon (CrossFireTM Ready) graphics card 1. You are allowed to install two CrossFireTM Edition graphics cards to both slots, or you may use one CrossFireTM Edition graphics cards and a compatible standard Radeon (CrossFireTM Ready) graphics card from the same series. 2. For ATITM Radeon X1300, X1600, X1650 and X1950Pro series, there are no CrossFireTM Edition graphics cards. You can still install two regular graphics cards from the same series on PCIE1 slot and AGI Express slot (PCI Express x4) to support CrossFireTM. Besides, please connect the monitor cable to the graphics card on PCIE1 slot. Step 5. Correctly connect the DVI-DMS cable to the monitor connector and two graphics cards that you install. (If you install two standard Radeon (CrossFireTM Ready) graphics cards to this motherboard, please skip this step.) DVI-DMS cable DMS connector DVI connector Connect the DVI-DMS cable to DVI connector of the compatible standard Radeon (CrossFireTM Ready) graphics card. Standard Radeon (CrossFireTM Ready) graphics card DVI connector There are two DVI connectors on the standard Radeon (CrossFireTM Ready) graphics card. Please connect the DVI-DMS cable to the correct DVI connector; otherwise , the graphics card will not work. 22