ASRock AM2NF3-VSTA User Manual - Page 30

3.3.2 Chipset Configuration BIOS SETUP UTILITY Advanced Chipset Settings OnBoard UAA Audio OnBoard LAN [Auto] [Enabled] AGP Data Rate AGP Aperture Size AGP Fast Write AGP SideBand Address Primary Graphics Adapter [4X] [64MB] [Disabled] [Enabled] [PCI] CPU-NB Link Speed CPU-NB Kink Width DRAM Voltage AGP Voltage [Auto] [Auto] [Auto] [Auto] To set DRAM Voltage. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. OnBoard LAN This allows you to enable or disable the onboard LAN feature. OnBoard UAA Audio Select [Auto], [Enabled] or [Disabled] for the onboard UAA Audio feature. If you select [Auto], the onboard UAA Audio will be disabled when PCI Sound Card is plugged. AGP Data Rate Use this item to adjust the AGP Data Rate. Configuration options: [8X], [4X]. The default value is [8X]. AGP Aperture Size It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless the installed AGP card's specifications requires other sizes. Configuration options: [32MB], [64MB], [128MB], [256MB], and [512MB]. AGP Fast Write This allows you to enable or disable the feature of AGP fast write protocol support. AGP SideBand Address This allows you to enable or disable the feature of AGP SideBand Address. Configuration options: [Enabled], and [Disabled]. Primary Graphics Adapter This item will switch the PCI Bus scanning order while searching for video card. It allows you to select the type of Primary VGA in case of multiple video controllers. The default value of this feature is [PCI]. Configuration options: [PCI] and [AGP]. CPU - NB Link Speed This feature allows you selecting CPU to NB link frequency. Configuration options: [Auto], [200 MHz], [400 MHz], [600 MHz], and [800 MHz]. 30