ASRock B250M Pro4 Quick Installation Guide - Page 25
M.2_SSD NGFF Module Installation Guide
View all ASRock B250M Pro4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
B250M Pro4 2.6 M.2_SSD (NGFF) Module Installation Guide The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket (M2_1) supports type 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x4 (32 Gb/s). The Ultra M.2 Socket (M2_2) supports type 2230/2242/2260/2280 M.2 PCI Express module up to Gen3 x4 (32 Gb/s). * Please be noted that if M2_1 is occupied by a SATA-type M.2 device, SATA3_0 will be disabled. * If PCIE2 slot or PCI slot is occupied, the PCIe-type M.2 device on M2_1 socket will run at Gen3 x2 (16 Gb/s). Installing the M.2_SSD (NGFF) Module Step 1 Prepare a M.2_SSD (NGFF) module and the screw. D C B A Step 2 Depending on the PCB type and length of your M.2_SSD (NGFF) module, find the corresponding nut location to be used. English No. Nut Location PCB Length Module Type 1 A 3cm Type2230 2 B 4.2cm Type 2242 3 C 6cm Type2260 4 D 8cm Type 2280 23