ASRock H610M-HDV/M.2 R2.0 User Manual - Page 32
Step 3, Gently insert the M.2 NGFF SSD
View all ASRock H610M-HDV/M.2 R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
C B A C B A C B A H610M-HDV/M.2 R2.0 H610M-HVS/M.2 R2.0 Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location C by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 4 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 5 Gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. English C B A 20o NUT2 NUT1 Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module. 25