ASRock K7S41GX User Manual - Page 25

Chipset Configuration: Advanced AMIBIOS SETUP UTILITY - VERSION 3.31a Chipset Configuration [ Setup Help ] Onboard VGA Share Memory AGP Aperture Size USB Controller USB 2.0 Controller USB Device Legacy Support DRAM CAS Latency Over Vcore Voltage Auto 64M Enabled Enabled Disabled Auto Disabled to set the share memory size of the onboard VGA.. F1:Help Esc:Previous Menu :Select Item +/-:Change Values Enter:Select Sub-Menu F9:Setup Defaults F10:Save & Exit OnBoard VGA Share Memory: This allows you to select the size of share memory for onboard VGA. Onboard VGA will get better resolution if larger size of share memory is selected. AGP Aperture Size: It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless the installed AGP card's specifications requires other sizes. USB Controller: Use this to enable or disable the use of USB controller. USB 2.0 Controller: Use this to enable or disable USB 2.0 controller. If this is set to [Disabled], USB Controller will run at USB 1.1. USB Device Legacy Support: Use this to enable or disable the support to emulate legacy I/O devices such as mouse, keyboard,... etc. DRAM CAS Latency: This is used to adjust the means of memory accessing. Configuration options: [Auto], [2T], [2.5T], [3T]. Please note that not all the DDR DIMMs can support CAS latency=3T. Over Vcore Voltage: This feature allows you to increase the CPU Vcore voltage by 3% or 6%. The default value is [Disabled]. It is not recommended to enable "Over Vcore Voltage" feature. Doing so may cause CPU damage. 25