ASRock K8Upgrade-PCIE User Manual - Page 27

TRCD Use this to adjust TRCD values. Configuration options: [Auto], [2CLK], [3CLK], [4CLK], [5CLK], and [6CLK]. TRAS Use this to adjust TRAS values. Configuration options: [Auto], [5CLK], [6CLK], [7CLK], [8CLK], [9CLK], [10CLK], [11CLK], [12CLK], [13CLK], [14CLK], and [15CLK]. TRP Use this to adjust TRP values. Configuration options: [Auto], [2CLK], [3CLK], [4CLK], [5CLK], and [6CLK]. MA Timing Use this to adjust values for MA timing. Configuration options: [Auto], [2T], [1T]. The default value is [Auto]. 3.3.2 Chipset Configuration BIOS SETUP UTILITY Advanced Chipset Settings OnBoard AC97 Audio OnBoard LAN Primary Graphics Adapter [Auto] [Enabled] [PCI] HT Width HT Speed DRAM Voltage [Auto] [Auto] [Auto] Enable/Disable onboard Audio device. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. OnBoard AC97 Audio Select [Auto] or [Disabled] for the onboard AC97 Audio feature. OnBoard LAN This allows you to enable or disable the onboard LAN feature. Primary Graphics Adapter This item will switch the PCI Bus scanning order while searching for video card. It allows you to select the type of Primary VGA in case of multiple video controllers. The default value of this feature is [PCI]. Configuration options: [PCI] and [PCIE]. HT Width You may set the HyperTransport width as [8 Bit], [16 Bit], or [Auto]. The default value is [Auto]. HT Speed You may set the HyperTransport speed as [Auto], [200 MHz], [800 MHz], or [1000 MHz]. The default value is [Auto]. 27