ASRock P4Twins-HDTV User Manual - Page 19
Installing VGA_HDTV Panel to Enjoy HDTV High, Definition TV / TV Support Function
View all ASRock P4Twins-HDTV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2.7 Installing VGA_HDTV Panel to Enjoy HDTV (HighDefinition TV) / TV Support Function Additional VGA_HDTV panel with VGA and 3 RCA-type component video output, that allows PC to connect to all high-definition TV with component video input capability (YPbPr) or TV with AV input capability. ASRock VGA_HDTV Layout 1 2 3 4 Y-CON1 PB-CON1 PR-CON1 VGA1 FCC ` J2 VGA_HDTV 1 RoHS J1 5 6 1 Y-CON1: RCA-type component video connector (green) 2 PB-CON1: RCA-type component video connector (blue) / AV (composite) signal connector 3 PR-CON1: RCA-type component video connector (red) 4 VGA1: 25pin D-Sub (blue) for VGA monitor 5 J2 header 6 J1 header Installing VGA_HDTV Panel Step 1. Either end of the VGA_2X8 cable can be connected to the J1 jumper of VGA_HDTV panel or the VGA1 header of this motherboard. Step 2. Either end of the AV/S_2X3 cable can be connected to the J2 jumper of VGA_HDTV panel or the TV-OUT header of this motherboard. Step 3. Connect the output connectors to all high-definition TV with component video input capability (YPbPr) or TV with AV input capability. Step 4. Secure the VGA_HDTV panel with the bracket to the chassis. 1. You must have a monitor attached to your computer to install the VGA driver correctly in advance. 2. After installing the VGA driver to the computer, this motherboard supports static "Auto Sensing" feature. That is, if you install the stand alone HDTV, TV, or VGA monitor before your computer boots, the system can display correctly on the output device you use. Therefore, if you only install HDTV or TV instead of VGA monitor, it is not necessary for you to enable the TV display setting in Windows control panel or change BIOS setup, and you can enjoy the HDTV or TV display function directly. 19