ASRock P4Twins-HDTV User Manual - Page 22

D. Click the enable button or disable button accordingly for YPbPr display output. Enable Button (Green) Disable Button (Red) E. Click OK or Apply to save the changes or use hot key to do fast switching between CRT and YPbPr. (Default hot key is Alt-F5.) F. Your HDTV will start to display. Step 5. Change HDTV display settings. (Please refer to Step 3 on page 20 for details.) 2.7.2 TV Support Function Connecting to TV With AV Output Capability Step 1. Connect the AV video cable to the Typical TV Video Input connector (yellow) and the RCA-type component video connector (blue) / AV (composite) signal connector (PB-CON1, see page 19, No. 2) of the VGA_HDTV panel. Step 2. Turn on your computer and wait system to boot into OS. Connecting to VGA Monitor and TV With AV Output Capability When you install both VGA monitor cable and AV video cable to VGA_HDTV panel at the same time, the default enabled screen is the VGA monitor. You are able to switch the monitor display to TV display by following the below instruction. Step 1. Connect one end of the VGA monitor cable to your monitor, and the other end to the VGA port (VGA1, see page 19, No. 4) of VGA_HDTV panel. Step 2. Connect the AV video cable to the Typical TV Video Input connector (yellow) and the RCA-type component video connector (blue) / AV (composite) signal connector (PB-CON1, see page 19, No. 2) of the VGA_HDTV panel. Step 3. Turn on your computer and wait system to boot into OS. Step 4. Switch the monitor display to TV display and select proper TV format. For selecting proper TV format, please follow the below steps: A. Click the Windows Start button, point at Settings, and then click Control Panel. B. Double-click the Display icon, click the Settings tab, and use the Screen Area slider to select the resolution you want. C. Click the Advanced button, then click the Displays tab. D. Click the TV tab, and select NTSC, PAL. E. Your TV will start to display. 22