ASRock X79 Extreme7 User Manual - Page 57

Create Team, Team Name, Team Type, Load Balance Members, Standby Member

Get ASRock X79 Extreme7 PDF manuals and user guides View all ASRock X79 Extreme7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

4. Click the Create Team tab. * The Create Team tab appears only if there are teamable adapters available. 5. Click the Team Name eld to enter a team name. 6. Click the Team Type eld to select a team type. 7. Assign any available adapter or adapters to the team by selecting the adapter from the Load Balance Members list. There must be at least one adapter selected in the Load Balance Members list. 8. You can assign any other available adapter to be a standby member by selecting it from the Standby Member list. * There must be at least one Broadcom network adapter assigned to the team. The Large Send Of oad (LSO), Checksum Of oad (CO), and RSS indicate if the LSO, CO, and/or RSS properties are supported for the team. The LSO, CO, and RSS properties are enabled for a team only when all of the members support and are con gured for the feature. * Adding a network adapter to a team where its driver is disabled may negatively affect the of oading capabilities of the team. This may have an impact on the team's performance. Therefore, it is recommended that only driver-enabled network adapters be added as members to a team. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
57
4. Click the
Create Team
tab.
* The
Create Team
tab appears only if there are teamable adapters available.
5. Click the
Team Name
eld to enter a team name.
6. Click the
Team Type
eld to select a team type.
7. Assign any available adapter or adapters to the team by selecting the adapter
from the
Load Balance Members
list. There must be at least one adapter
selected in the
Load Balance Members
list.
8. You can assign any other available adapter to be a standby member by selecting
it from the
Standby Member
list.
* There must be at least one Broadcom network adapter assigned to the team.
The Large Send Of oad (LSO), Checksum Of oad (CO), and RSS indicate if
the LSO, CO, and/or RSS properties are supported for the team. The LSO, CO,
and RSS properties are enabled for a team only when all of the members
support and are con gured for the feature.
* Adding a network adapter to a team where its driver is disabled may negatively
affect the of oading capabilities of the team. This may have an impact on the
team’s performance. Therefore, it is recommended that only driver-enabled
network adapters be added as members to a team.