ASRock Z490 Pro4 User Manual - Page 39
M.2_SSD (NGFF) Module Installation Guide (M2_2
View all ASRock Z490 Pro4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Z490 Pro4 2.10 M.2_SSD (NGFF) Module Installation Guide (M2_2) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket (M2_2) supports M Key type 2260/2280/22110 M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x4 (32 Gb/s). * If M2_2 is occupied by a SATA-type M.2 device, SATA3_1 will be disabled. * If M2_2 is occupied by a PCIe-type M.2 device, SATA3_0 will be disabled. Installing the M.2_SSD (NGFF) Module Step 1 Prepare a M.2_SSD (NGFF) module and the screw. 3 2 1 Step 2 Depending on the PCB type and length of your M.2_SSD (NGFF) module, find the corresponding nut location to be used. C B No. Nut Location PCB Length Module Type A 1 A 6cm Type2260 2 B 8cm Type 2280 3 C 11cm Type22110 1 2 1 Step 3 Before installing a M.2 (NGFF) SSD module, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD module. 33 English