ASRock Z490 Pro4 User Manual - Page 40
Step 4, Step 5, Step 6, Step 7
View all ASRock Z490 Pro4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
C B A C B A C B A Step 4 Move the standoff based on the module type and length. The standoff is placed at the nut location B by default. Skip Step 4 and 5 and go straight to Step 6 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 5 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 6 Gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. English C B A 20o 34 NUT2 NUT1 Step 7 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module.
34
English
A
B
C
Step 4
Move the standoff based on the
module type and length.
°e standoff is placed at the nut
location B by default. Skip Step 4 and
5 and go straight to Step
6
if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
A
B
C
Step 5
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
A
B
C
A
B
C
20
o
Step 6
Gently insert the M.2 (NGFF) SSD
module into the M.2 slot.
Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
NUT1
NUT2
Step 7
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
as this might damage the module.