ASRock Z690 Pro RS User Manual - Page 49
Gently insert the M.2 NGFF SSD, module into the M.2 slot.
View all ASRock Z690 Pro RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
C B A C B A C B A Z690 Pro RS Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location C by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 4 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 5 Gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. C B A 20o C NUT2 NUT1 Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module. 41 English
41
English
Z690 Pro RS
A
B
C
Step 3
Move the standoff based on the
module type and length.
°e standoff is placed at the nut
location C by default. Skip Step 3
and 4 and go straight to Step
5
if you
are going to use the default nut.
Otherwise, release the standoff by
hand.
A
B
C
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
20
o
A
B
C
A
B
C
Step 5
Gently insert the M.2 (NGFF) SSD
module into the M.2 slot.
Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
NUT1
NUT2
C
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
as this might damage the module.