ATI 100-714116 User Guide - Page 52
Video problems ..., the TV Channels Initialization Wizard.
![]() |
UPC - 727419411394
View all ATI 100-714116 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
46 Reference Video problems ... Problem Possible Solution Video is unstable or only black and white Check that you are using the correct broadcast standard format: • For proper operation, you must specify your country in the TV Channels Initialization Wizard. • Check the quality of your incoming TV signal on another receiver; bad reception may be the cause. • Try connecting your tuner directly to the cable TV or antenna source. Too many splitters in the cable will degrade the signal. There is no video or audio • Ensure that your cable or antenna is connected. • In the TV Video Settings page, ensure that the video connector is set to the correct source. • Check that the audio and video connectors are securely plugged into the correct jacks. • Check that your video card is securely seated in its slot. Please refer to the user guide for the card location. Video recording stops unexpectedly • Video files are typically very large; ensure that you have sufficient disk space. • Ensure that you are recording to the correct hard disk - click the Disk Space Settings button in the Personal Video Recorder settings page. • The maximum file size for the FAT 32 file system is 4 Gigabytes. You can reduce the file size by reducing the frame size of the recording in Personal Video Recorder settings. MPEG files are usually much smaller than AVI files. • Disable screen savers while recording. • Disable Power management while recording.
![](/manual_guide/products/ati-technologies-9600-user-guide-0d47d1c/52.png)