ATI V7100 User Guide - Page 13
Connect the power cable to the 6-pin power connection on the, graphics card.
UPC - 727419411813
View all ATI V7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Detailed Installation 7 1 Turn off the computer, monitor, and other peripheral devices. 2 Unplug the computer's power cord and disconnect all cables from the back of your computer. L WARNING - Wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral or removing a component from the motherboard to avoid possible damage to the motherboard. 3 Remove the computer cover. If necessary, consult your computer's manual for help in removing the cover. L WARNING - Remember to discharge your body's static electricity by touching the power supply or the metal surface of the computer chassis. 4 Unscrew or unfasten and remove any existing graphics card from your computer. Note: If your computer has an on-board graphics capability, you may need to disable it on the motherboard. For more information, see your computer documentation. 5 Locate the appropriate slot and, if necessary, remove the metal back- plate cover. 6 Align your ATI graphics card with the slot and press it in firmly until the card is fully seated. 7 Connect the power cable to the 6-pin power connection on the graphics card. 8 Screw in or fasten the graphics card securely. Make sure the cables are not interfering with anything inside the computer (for example, a cooling fan) and replace the computer cover. 9 Reconnect any cables you have disconnected and plug in the computer's power cord. 10 Turn on the monitor, and then your computer.