Acer AL707 User Guide - Page 6
Controls And Connectors, Signal Cable - lcd monitor
View all Acer AL707 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
CONTROLS AND CONNECTORS SIGNAL CABLE Connecting the Signal Cable: the LCD monitor comes with a built-in signal cable. Plug the signal cable′s 15-pin connector into the computer's VGA port and tighten the two screws on the cable connector. Connecting the Power Cord: Plug the AC-power cord into the External Adapter. Then plug the DC-jack power cable into DC-IN Inlet. Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied). Figure 2 Connecting Cables 1. Signal Cable 2. DC-Jack Power Cable 3. AC Power Cord 4. External Adapter 41L1700-786-1B 英文 5
41L1700-786-1B 英文
5
CONTROLS AND CONNECTORS
SIGNAL CABLE
Connecting the Signal Cable:
the LCD monitor comes with a built-in signal
cable. Plug the signal cable
′
s 15-pin connector into the computer's VGA port
and tighten the two screws on the cable connector.
Connecting the Power Cord:
Plug the AC-power cord into the External
Adapter. Then plug
the
DC-jack power cable
into DC-IN Inlet.
Caution:
If the AC outlet is not grounded (with three holes), install the proper
grounding adapter (not supplied).
Figure 2
Connecting
Cables
1.
Signal Cable
3.
AC Power Cord
2.
DC-Jack Power Cable
4.
External Adapter