Acer Altos G320 Altos G320 User's Guide - Page 44
Removing the CPU, Installing the CPU, Pentium D, or Celeron D processors.
View all Acer Altos G320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
34 3 System upgrade 5 Place the HSFD assembly upside down on a flat surface. Note: Wipe off the thermal grease from both the HSFD assembly and CPU using an alcohol pad. Removing the CPU 1 Pull the CPU socket retainer lever to a fully open, upright position (1). 2 Lift the load plate (2). 3 Pull out the CPU from the socket (3). Installing the CPU The mainboard has a 775-pin processor socket that support Intel Pentium D, Pentium 4, or Celeron D processors. 1 Observe the ESD precautions and pre-installation instructions described on page 25. 2 Locate the CPU socket on the mainboard. 3 Push the CPU socket retainer lever down and away from the socket (1). 4 Lift the load plate (2).
3 System upgrade
34
5
Place the HSFD assembly upside down on a flat surface.
Note:
Wipe off the thermal grease from both the HSFD assembly
and CPU using an alcohol pad.
Removing the CPU
1
Pull the CPU socket retainer lever to a fully open, upright position
(1)
.
2
Lift the load plate
(2)
.
3
Pull out the CPU from the socket
(3)
.
Installing the CPU
The mainboard has a 775-pin processor socket that support Intel
Pentium D, Pentium 4, or Celeron D processors.
1
Observe the ESD precautions and pre-installation instructions
described on page 25.
2
Locate the CPU socket on the mainboard.
3
Push the CPU socket retainer lever down and away from the socket
(1)
.
4
Lift the load plate
(2)
.