Acer Aspire E360 Aspire T160/Aspire E360 Service Guide - Page 45

IDE Function Setup Phoenix - Award BIOS CMOS Setup Utility IDE Function Setup OnChip IDE Channel0 Primary Master PIO [Enabled] [Auto] Item Help Primary Slave PIO [Auto] Menu Level Primary Master UDMA [Auto] Primary Slave UDMA [Auto] OnChip IDE Channel1 [Enabled] Secondary Master PIO [Auto] Secondary Slave PIO [Auto] Secondary Master UDMA [Auto] Secondary Slave UDMA [Auto] IDE DMA Transfer Access [Enabled] Serial-ATA 1 [Enabled] Serial-ATA 2 [Enabled] IDE Prefetch Mode [Enabled] IDE HDD Block Mode [Enabled] SATA PORT Speed Settings [Auto] :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults All on-board peripherals can be set up through this menu. Parameter On-Chip IDE First/Second Channel IDE Primary/ Secondary Master/ Slave PIO Description The chipset contains a PCI IDE interface with support for two IDE channels. Select Enabled to activate the first and/or second IDE interface. Select Disabled to deactivate an interface, if you install a primary and/or secondary add-in IDE interface. Enabled Disabled The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide successively increased performance. In Auto mode, the system automatically determines the best mode for each device. Options Chapter 2 36