Acer Aspire E360 Aspire T160/Aspire E360 Service Guide - Page 56

Set Supervisor/User Password When this function is selected, the following message appears at the center of the screen to assist you in creating a password. ENTER PASSWORD Type the password, up to eight characters, and press . The password typed now will clear any previously entered password from CMOS memory. You will be asked to confirm the password. Type the password again and press . You may also press to abort the selection. To disable password, just press when you are prompted to enter password. A message will confirm the password being disabled. Once the password is disabled, the system will boot and you can enter BIOS Setup freely. PASSWORD DISABLED If you have selected "System" in "Security Option" of "BIOS Features Setup" menu, you will be prompted for the password every time the system reboots or any time you try to enter BIOS Setup. If you have selected "Setup" at "Security Option" from "BIOS Features Setup" menu, you will be prompted for the password only when you enter BIOS Setup. Supervisor Password has higher priority than User Password. You can use Supervisor Password when booting the system or entering BIOS Setup to modify all settings. Also you system or entering BIOS Setup but can not modify any setting if Supervisor Password is enabled. CMOS Setup Utility - copyright (C) 1984-2005 Award Software XProduct Information XPC Health Status XStandard CMOS Features XFrequency Control XAdvanced BIOS Features Load Default Settings XAdvanced Chipset Features Set Supervisor Password XIntegrated Periphera Enter Password: Password XPower Management Setup Save & Exit Setup XPnP/PCI Configurations Exit Without Saving Esc:Quit F10: Save & Exit Setup KLIJ : Select 47 Chapter 2