Acer Aspire E360 Aspire T160/Aspire E360 Service Guide - Page 51

Parameter Description Options HDD Power Down This setting controls how long a hard disk drive must be left idle before it spins down. Disabled Standby Suspend HDD Down In Suspend Enables or disables the functionality of HDD down in suspend. Enabled Disabled Soft-off by PWR/BTTN When Enabled, turning the system off with the on/off button places the system in a very lowpower-usage state, with only enough circuitry receiving power to detect power button activity or Resume by Ring activity. Instant-off: Press down button then power off instantly Delay 4 Sec.: Press power button 4 sec. to power off. Enter suspend if button is pressed less than 4 sec. WOL (PME#) From Soft- This category enables or disables wake-on-Lan Enabled Off from soft-off Disabled USB Resume from S1/S3 Enable or Disable USB device (USB K/B or Mouse) wake up system from S1/S3. Enabled Disabled Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Data/Time to power on system Disabled: Disable this function Enabled: Enable alarm function to Power On system If RTC Alarm Lead To Power On is Enabled. Date (of Month) Alarm: Everyday, 1~31 Time (hh:mm:ss) Alarm: (0.~23):(0~59):(0~59) POWER ON Function Select the method to power on the system. Button Only Keyboard 98 Hot Key Mouse Left Mouse Right PWRON After PWR-Fail This field allows you to determine the power status to on/off or former-sts after the system. FORMER-Sts On Off Chapter 2 42