Acer HR274H User Manual - Page 9
Power Adaptor
View all Acer HR274H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Power saving The monitor will be driven into Power Saving" mode by the control signal from the display controller, as indicated by the amber-color power LED. State ON P o w e r S a v in g Mode LED Lig h t W h ite A m ber The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 3 seconds. DDC To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing. The monitor supports DDC2B standard. Power Adaptor Your device uses one of the following power supplies. Ob je c t / Part No. Manufacturer/ Trademark Type/ Model Power Adaptor DELTA ADP-65JH DB EN-8