Acer P1385WB User Manual - Page 42
VGA OUT, Standby, DC 5V Out, HDMI CEC, Internal, Reset
View all Acer P1385WB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
English 32 VGA OUT (Standby) DC 5V Out (Standby) HDMI CEC (Internal) Reset Selecting "On" enables the function. The projector can output a VGA signal when it is in standby mode and the VGA IN (or VGA IN 1) and VGA OUT sockets are correctly connected to the devices. Enabling this function slightly increases the standby power consumption. Selecting "On" enables the function. Both micro USB cable inside the projector and the DC 5V out port/USB A port (if available) on the back of the projector can output 5V power when it is in standby mode. Enabling this function slightly increases the standby power consumption. Selecting "On" allows synchronized power ON/OFF operation between the projector and a CEC-compatible device connected to the HDMI/MHL port of the projector. This function is only available for the internal HDMI/ MHL port. Press after choosing "Yes" to return the display parameters on all menus to the factory default settings.