Acer UL6500 User Manual - Page 34
Setting up the Projector Network Environment, Network settings on the computer
View all Acer UL6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Setting up the Projector Network Environment This section describes the basic procedure for using the projector via the network. If the network is already constructed, the projector's network settings may need to be changed. Please consult your network administrator for assistance with these settings. You can make network settings both on the projector and on the computer. The following procedure is for making settings on the computer. Network settings on the computer 1. Connecting a projector to a computer. Connect a LAN cable (Category 5, cross-over type) between the computer and projector. LAN cable (commercially available) 2. Setting an IP address for the computer. Adjust the IP settings of the computer to enable one-to-one communications with the projector. Temporarily change the computer's IP address. 3. Setting up a network connection for the projector. Adjust the projector network settings to conform to your network. Use Internet Explorer (version 11 or later) to make various projector settings. Note • When connecting to a hub, use a straight-though Category 5 (CAT.5) type cable (commercially available). • The following browsers are supported. - Internet Explorer 11 or later 33