Acer VG271US User Manual - Page 27
Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.
View all Acer VG271US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Adjusting the System 1. Press the MENU key to open the OSD. 2. Using the Navi/OK button, select System from the OSD. Then navigate to the setting you wish to adjust. 3. Use the Navi/OK button to select the setting. 4. Input: Select the source from an available input source. 5. Auto Source: Automatically searches for available input sources. 6. DP Format: You can select which DP format you are using. The default is set at DP1.4. 7. Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2. 8. Wide Mode: You can select which screen aspect you are using. The options are Full, Aspect and 1:1. 9. DDC/CI: Allows the monitor settings to be set through the software on the PC. Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software. 10. HDMI Black Level: You can select the level of blackness under HDMI source. The options are Normal and Low. 11. Quick Start Mode: Enable monitor rapidly. EN-17