Acer VL7860 User Manual - Page 30
Image
View all Acer VL7860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
20 English Image Projection • Front: The factory default setting. Aspect Ratio Sharpness Super Resolution Signal • Rear: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. • Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. Use this function to choose your desired aspect ratio. • Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. • Full: Resize image to fit full screen by width (3840 pixels) and height (2160 pixels). • 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. • 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. • L.Box: Keep original signal aspect ratio and zoom in by 1.333 times. • Anamorphic 2.35:1: Stretches the image vertically to fit anamorphic lens. Keeps the image with original width ratio and resizes the its height to 1.321875 ties of the orginal image. Adjusts the sharpness of the image. • Press to decrease the sharpness. • Press to increase the sharpness. Adjust the edges of the projected image in order to provide more perceived details. H. Position (Horizontal position) • Press to move the image left. • Press to to move the image right. V. Position (Vertical position) • Press to move the image left. • Press to to move the image right. Frequency "Frequency" changes the projector's refresh rate to match the frequency of your computer's graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Tracking Synchronizes the signal timing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it.