Acer Veriton 7600G Veriton 3600G/5600G/7600G Service Guide - Page 85

Disassembling the Veriton 5600D/ 5600G Open the Housing Cover This section tells you how to open the housing cover when you need to install additional components inside the system unit. CAUTION: Before you proceed, make sure that you have turned off the system and all peripherals connected to it. Removing the Housing Cover 1. Turn off the system power and unplug all cables. 2. Place the system unit on a flat, steady surface. 3. Turn the two thumbscrews counterclockwise to remove the cover. Set the screws aside. You will need them when replacing the housing cover. 4. Hold the sides of the cover with both hands. Slide it back about an inch and then gently pull it outward to detach it . Removing the Front Panel 1. See "Removing the Housing Cover" on page 76 2. Release the latches as shown here and then detach the front bezel from the front panel gently in the way as shown here. 76 Chapter 3