Acer Veriton 7600G Veriton 3600G/5600G/7600G Service Guide - Page 96
Removing the System Main Board, Removing the I/O Port Bracket
View all Acer Veriton 7600G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Removing the System Main Board 1. See "Removing the Housing Cover" on page 76 2. See "Removing a Dummy Link Bar" on page 77 3. See "Removing the AGP VGA Card" on page 78 4. See "Removing the Modem Card" on page 78 5. Before you remove the system main board, make sure that all cables connected to the main board are removed. 6. Remove the eight screws as shown here and then detach the main board from the housing . Removing the I/O Port Bracket 1. See "Removing the Housing Cover" on page 76 2. See "Removing a Dummy Link Bar" on page 77 3. See "Removing the AGP VGA Card" on page 78 4. See "Removing the Modem Card" on page 78 5. See "Removing the System Main Board" on page 87 6. Slide the bracket and then lift it up in the direction as shown. Veriton 3600(D/G)/5600(D/G)/7600(D/G) 87