Acer Veriton 7600G Veriton 7600G Service Guide - Page 72

. Parameter Description Options CPU L1 & L2 Cache CPU L1 & L2 cache enabled Enabled/ Disabled Swap Floppy Drive If the system has two floppy drives, choose enabled to assign physical drive B to logical drive A and vice versa. Disabled/Enabled Boot Up Floppy Seek If the item is enabled, BIOS will test floppy drives to determine whether they have 40 or 80 tracks. Disabled/Enabled Boot Up NumLock Status Selects power on state for NumLock. On/ Off Gate A20 Option Fast: Lets chipset control Gate A20 Normal: A pin in the keyboard controller, controls Gate 20. Default is fast. Fast/Normal Typematic Rate Setting Keystrokes repeat at a rate determined by the keyboard controller-- when enabled, the typematic rate and typematic delay can be selected. *Typematic Rate (Chars/Sec) 6 *Typematic Delay (MSec) 250 Disabled/Enabled APIC Mode Advanced Interrupt Controller. The I/O APIC handles interrupts very differently than the 8259. (Refer to ICH4 EDS Rev 1.0 P6-39, 6.8) Enabled Disabled MPS Version Control For OS Multi CPU for NT. system 1.4/ 1.1 OS Select For DRAM > 64MB Select OS2 only if you are running OS/2 operating system Non-OS2 with greater than 64MB of RAM on the system. OS2 Report No FDD for WIN 95 Fow WIN 95 No Yes Advanced Chipset Features Selecting "Advanced BIOS Features" from the Advanced Options menu displays the following screen. The following table describes the parameters found in the sub-menu. Settings in boldface are the default and suggested settings. Chapter 2 62