Acer Veriton 7600G Veriton 7600G Service Guide - Page 96

Removing the AGP VGA Card 1. See "Removing the Housing Cover" on page 85 2. Remove the screw on the bracket of the AGP card. Set the screw aside, you will need it when inserting the AGP card. 3. Gently pull out the AGP card to remove it from the AGP slot . NOTE: There is no AGP slot for Veriton 5600. NOTE: When you turn on the system, BIOS automatically detects and assigns resources to the PCI or AGP devices. Removing the Modem Card 1. See "Removing the Housing Cover" on page 85 2. Remove the one screw as shown below and then remove the modem card from the PCI slot . NOTE: When you turn on the system, BIOS automatically detects and assigns resources to the PCI or AGP. Removing the USB/ Audio Board Module 1. See "Removing the Housing Cover" on page 85 2. See "Removing the Modem Card" on page 87 3. Disconnect the USB cable and the memory stick cable from the main board . 4. Remove the two screws as shown here and then detach the USB/ Audio board 87 Chapter 3