Actiontec FV2200 Instruction Manual - Page 26
Fastening Mounting Plates
View all Actiontec FV2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
FV2200 3.2 Fastening Mounting Plates The FV2200 can be installed transversely or vertically by using the attached mounting plates. ■In the case of installing the system vertically. (Factory Setting) (1) Turn off the power switch of the system. (2) Unplug all the cables from the system. (3) Turn the machine upside down to place the rubber feet facing up. (4) Fasten the mounting plates to the machine tightly using the screws. Screw positions for fastening the mounting plates. ■In the case of installing the system transversely (1) Turn off the power switch of the system. (2) Unplug all the cables from the system. (3) Turn the machine upside down and unscrew the screws in the middle of the rubber feet to remove them. (4) Fasten the rubber feet into the holes, which are located on the right side of the machine, using the screws provided. (5) Turn the machine upside down to place the rubber feet facing up. (6) Fasten the mounting plates to the machine tightly using the screws. Screw positions for fastening the mounting plates. Caution If the FV2200 is not fastened, the machine may topple and be damaged. Be sure to fasten the machine using the mounting plates. - 14 -