Actiontec FV2200 Instruction Manual - Page 27
Power Supply Wiring
View all Actiontec FV2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3.3 Power Supply Wiring FV2200 Warning Power Source Make sure that the source voltage matches the power supply voltage of the FV2200 before turning on power. Power Cable and Plug Use the power cable (when use in Japan) supplied by FAST, to prevent electrical shock and fire. Connect the main plug to the AC outlet with a protective earth terminal. Do not use a cable extension without the protective earth cables. If such a cable extension is used, the protective operation will be disabled. Protective Earth Be sure to ground the protective earth terminal before turning on power to the FV2200 to prevent electrical shock. The power cable for the FV2200 is a 3P power cable with a grounding conductor. Connect it to a 3P outlet with a protective earth terminal. Necessity of Protective Earth Do not cut-off the protective earth conductor inside or outside the FV2200 or disconnect the protective earth wiring, to avoid hazards. Warning Be sure to observe the following to prevent damage to the machine, electrical shock or fire. Be sure to disconnect the power cable and connection cables before connecting or disconnecting the earth conductor. Observe the following when handling the power cable. (1) Do not use a damaged power cable. (2) Do not modify the power cable or the plug. (3) Do not place a heavy object on the power cable. (4) Do not bend, twist or pull the cable by force. (5) Do not place the cable near a heating apparatus. (6) Do not connect the cable to an outlet extension to which other heat producing devices are connected. When the TV camera connected to the FV2200 is to be mounted on a robot arm, be careful with the earth connection so that there is no potential difference of the GND level. When the coaxial cable used for video transmission is to be relayed using a relay connector, the GND side will be exposed at the relay. This GND side has the same potential as that of the SG of the machine. Be careful not to let it touch a high voltage source. - 15 -