Actiontec FV2200 Instruction Manual - Page 28
Daily Inspection, Filter Cleaning Procedure
View all Actiontec FV2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
FV2200 3.4 Daily Inspection The components may deteriorate due to heat, humidity, dust, frequent operation or other factors, and that can result in an accident. Check the following during daily inspection. Caution The fan of the FV2200 has a large intake of air. Inspect the fan at least once every 6 months. If the dust filter is not clean or clogged, clean or replace it. For a replacement filter, use Bridgestone polyurethane-foam "Everlight SF". (Material: HR-13 105mm x 95mm) Filter Cleaning Procedure (1) Turn off power to the FV2200. (2) Remove the screw (1 piece) of the air inlet on the front panel, and the metal cover will come off. Remove the filter. (3) Vacuum up the dust from the filter or blow off the dust using an air duster (compressed air). (4) Put the cleaned filter back into place, reversing the procedure (2). *When reconnecting connectors, check that they are connected correctly. Screw for fastening the mounting plate of the suction mouth Caution Do not use the FV2200 when the filter is clogged. Doing so will cause heat to build up inside the machine, resulting in damage to the machine or fire. If there is an abnormal sound, smell, heat or any other sign of danger, turn off the power immediately and disconnect the power plug from the outlet. Otherwise, electrical shock or fire may result. If a problem is determined, please contact our sales office or agent. - 16 -