Actiontec ScreenBeam Pro Education Edition 2 User Manual - Page 6
Verify that the Ready To Connect screen appears on the HDTV.
View all Actiontec ScreenBeam Pro Education Edition 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Setting Up ScreenBeam Pro When Steps 1 and 2 are complete, the hardware should be connected as shown in the figure below: 3. Turn on the HDTV and set it to display the input from the correct HDMI port connected in step 1. 4. Verify that the "Ready To Connect" screen appears on the HDTV. The Receiver is now connected to the HDTV monitor, and is ready to use. 4
4
Setting Up ScreenBeam Pro
When Steps 1 and 2 are complete, the hardware should be connected as
shown in the figure below:
3.
Turn on the HDTV and set it to display the input from the correct HDMI
port connected in step 1.
4.
Verify that the “Ready To Connect” screen appears on the HDTV.
The Receiver is now connected to the HDTV monitor, and is ready to use.