Adaptec 1520A User Guide - Page 47

Completing Installation

Get Adaptec 1520A - AHA Storage Controller Fast SCSI 10 MBps PDF manuals and user guides View all Adaptec 1520A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Hardware Installation Completing Installation Before you reassemble your computer, be sure that s The host adapter is firmly seated and secured in the slot s The devices on each SCSI bus are properly terminated s Each SCSI device on the SCSI bus has a unique SCSI ID s Internal and external SCSI devices are firmly connected to the host adapter, and pin-1 orientation is correct s Only one floppy controller is enabled (AHA-1522A only) Many computers have floppy controllers on the motherboard or on a non-SCSI controller. Follow these steps to complete installation: 1 Replace and secure the cover of the computer case. 2 Reconnect the power cords to all external SCSI devices and the computer. 3 Turn ON the power to all devices. 4 Boot the computer. See Chapter 5, Troubleshooting, if you encounter any problems during installation. Ì 3-13 AAAAAAAAAAAAAAAAAASPCAAAAAArtuHoiAAArncAAAArtkAAAe-SAAAn1NAAApt5AAAeuD1AAAcmAAA0aAAANtAbeAAAeu:/AAAr2mAAA1:0AAA15bAAAA/1eAAA1rAAA0S8:AAA4/e4AAA90rAAA94i0eAAA1-AAAs08AAAU04AAA,2AAAsR-AAAe0AAAre0'AAAvsAAA.AAAGCAAAuAAAAAAidAAAeAAAAAAAAAEAAACAAAAAANAAAAAADAAAAAAaAAAtAAAePAAA: aAAA1gAAA1AAAe/AAA:2AAA39AAA-/AAA91AAA43AAAAAAAAAAAAAAAAAAAA

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
3-13
Hardware Installation
AHA-1510A/20A Series User’s Guide
Stock Number: 510400-00, Rev. C
Page: 3-13
Print Spec Number: 491842-00
Current Date: 11/18/94
ECN Date: 11/29/94
Completing Installation
Before you reassemble your computer, be sure that
■
The host adapter is firmly seated and secured in the slot
■
The devices on each SCSI bus are properly terminated
■
Each SCSI device on the SCSI bus has a unique SCSI ID
■
Internal and external SCSI devices are firmly connected to the
host adapter, and pin-1 orientation is correct
■
Only one floppy controller is enabled (AHA-1522A only)
Many computers have floppy controllers on the motherboard
or on a non-SCSI controller.
Follow these steps to complete installation:
1
Replace and secure the cover of the computer case.
2
Reconnect the power cords to all external SCSI devices and the
computer.
3
Turn
ON
the power to all devices.
4
Boot the computer.
See Chapter 5,
Troubleshooting
, if you encounter any problems during
installation.