Adaptec 1821900 User Reference - Page 22
Configuring the Adaptec SCSI Card 29160 with SCSISelect, Select
View all Adaptec 1821900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Adaptec SCSI Card 29160 User's Reference Configuring the Adaptec SCSI Card 29160 with SCSISelect SCSISelect, included with the Adaptec SCSI Card 29160, enables you to change SCSI settings without opening the computer or handling the card. SCSISelect also enables you to low-level format or verify the disk media of your SCSI hard disk drives. The following table lists the available and default settings for each SCSISelect option. Note: The default settings are appropriate for most systems. Run SCSISelect if you need to change or view current settings, or if you would like to run the SCSI disk utilities. See the descriptions of each option starting on page 18. SCSISelect Options SCSI Bus Interface Definitions: Host Adapter SCSI ID SCSI Parity Checking Host Adapter SCSI Termination LVD/SE Connectors SE Connectors Boot Device Options: Boot SCSI ID Boot LUN Number1 SCSI Device Configuration: Sync Transfer Rate (MBytes/sec) Initiate Wide Negotiation Available Settings Default Setting 0-15 7 Enabled, Disabled Enabled Automatic, Enabled, Disabled Automatic Automatic Automatic Low On/High On Low Off/High Off Low Off/High On 0-15 0 0-7 0 160, 80.0, 53.4, 40.0, 160 32.0, 26.8, 20.0, 16.0, 13.4, 10.0, ASYN Yes, No Yes (Enabled) 16