Adaptec 1821900 User Reference - Page 30
Connecting SCSI Devices
View all Adaptec 1821900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Adaptec SCSI Card 29160 User's Reference Connecting SCSI Devices Here are some examples of how you can connect internal and external SCSI devices to the Adaptec SCSI Card 29160. To achieve maximum performance, attach the first device to the end connector (furthest from the SCSI card); attach other devices to the connectors that are closer to the SCSI card. The first example shows SCSI devices connected to all four internal and external connectors. Note the built-in terminator on the end of the internal LVD SCSI cable. The last external SCSI device must be terminated with an LVD/SE terminator plug to ensure that all devices will operate at their maximum speed. Built-in terminator Wide SCSI devices T T Ultra160/Ultra2 SCSI devices Terminated devices T Terminated device T Ultra/Fast Narrow SCSI devices The following example shows Ultra160 and Ultra2 SCSI devices connected to the 68-pin LVD/SE internal and external connectors. Terminated device T T Built-in terminator Ultra160/Ultra2 SCSI devices 24