Adaptec 2020SA User Guide - Page 44
Installing the Driver in an Existing OpenServer System, Install the new kernel by typing
UPC - 760884145289
View all Adaptec 2020SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installing the Driver 9 To enable RAID management software and utilities, type the following commands: cd mount-point/openserv/arc/driver/aacraid/reloc/tmp/aacraid/scripts cp ./aacaifd /usr/sbin cp ./S98aacaifd /etc/rc2.d chmod 755 /usr/sbin/aacaifd /etc/rc.d/S98aacaifd Installing the Driver in an Existing OpenServer System To install the driver in an existing operating system: 1 Install and configure your Adaptec RAID controller and hard drives, as described in Chapter 2. 2 Create the driver disk, as described on page 3-2. When finished, remove the driver disk. 3 Boot the server. 4 Insert the driver floppy disk. 5 To run the installpkg utility, open a terminal window and type the installpkg command. OpenServer reads the disk and performs the installation. 6 Rebuild the kernel. 7 Install the new kernel by typing y when prompted to make it the default kernel. 8 Restart the computer. 9 Add devices created on the RAID controller to the operating system. For details, refer to your OpenServer documentation. 10 Insert and mount the Adaptec installation CD. 11 To enable RAID management software and utilities, type the following commands: cd mount-point/openserv/arc/driver/aacraid/reloc/tmp/aacraid/scripts cp ./aacaifd /usr/sbin cp ./S98aacaifd /etc/rc2.d chmod 755 /usr/sbin/aacaifd /etc/rc.d/S98aacaifd 3-7